Twin Cage Passenger and Material Hoist SC200-200 VFD TUV Proved
Production and Materials
KANGBO implements the true modular design of rack and pinion
hoists, standardization and fine finishing of lifts parts and spare
parts, and assembly line production.
The hoists' drive devices and cages are universal, interchanged and
Main structure frame are made of 16Mn and Q345 high strength cold
roll steel plate, cut by laser, process by CNC machines in tool
fixtures, welded by robots.
The elevator cages' roofs are made by a full steel plate, and the
edges are totally welded, so there is not water leakage during
The users don't need to do water proof by themselves regularly.
The structure of elevator cars are reinforced.
Features and Advantages
* The material hoist runs without vibration or trembling. The man
and material lift starts and stops without surging or jerking.
* The passenger and elevator is reliable with very little breakdown
and is durable with very long work-life.
* Adopt energy-saving helical reducers made specially for rack and
pinion elevators, which will let the users save much costs of
* Racks centering at mast reduce partial load torque of builders
hoists, makes the construction hoists run more stably and smoothly.
* Applying non-eccentric rollers, make the installation of
construction site elevators be faster and easier, with much less
There is a small crane for conenient assembly of the construction
Twin cage for more efficient transportation.
|Payload capacity||2,000 kg|
|Lifting speed||0–36 m/min.|
|Max. lifting height||400 m|
|Cage width (internal)||1.5 m|
|Cage length (internal)||3.2 m|
|Cage height (internal)||2.35 m|
|Motor control||FC control|
|Engine power||2x11 kw per cage|
|Safety device type||centrifugal brake|
|Power supply range||380–500 V, 50 or 60 Hz, 3 phase|
|Type of mast||square column 650*650 mm with bolted rack|
|Length mast section||1.508 m|