Passenger and Materal Hoist rack and pinion high speed KP-B01
It is the truly modular rack and pinion hoist design, so the
elevator drive devices and cars are generic and interchangeable.
Multiple choice of construction lifts car doors or ramps is
The modular and standardizing system makes the Kangbo construction
elevators be flexible, efficient, safe, productive, low energy
consumptive and ownership cost, making them the best choice for
both construction and rental companies.
Features and Advantages
* The modular and standardizing system makes the Kangbo
construction elevators be flexible, efficient, safe, productive,
low energy consumptive and ownership cost, making them the best
choice for both construction and rental companies.
* The material hoist runs without vibration or trembling. The man
and material lift starts and stops without surging or jerking.
* The passenger and elevator is reliable with very little breakdown
and is durable with very long work-life.
* Adopt energy-saving helical reducers made specially for rack and
pinion elevators, extremely strong, reliable and durable.
* Racks centering at mast reduce partial load torque of builders
hoists, makes the construction hoists run more stably and smoothly.
|Payload capacity||1,000 kg|
|Lifting speed||0–54 m/min.|
|Max. lifting height||250/400 m*|
|Cage width (internal)||1.5 m|
|Cage length (internal)||3.2 m|
|Cage height (internal)||2.35 m|
|Motor control||FC control|
|Engine power||2x15 kw|
|Gearbox||KANGBO make Helical reducer|
|Safety device type||centrifugal brake|
|Power supply range||380–500 V, 50 or 60 Hz, 3 phase|
|Type of mast||square column 650*650 mm with bolted rack|
|Length mast section||1.508 m|
|* Increased lifting height on request. 250 m with step-up
transformer only. 400 m with step-up/step-down transformer.|
|Cage Internal Size||3.2(L)*1.5(W)*2.35(H) Meters||Perforated Galvanised Cold Roll Steel Plate|
|Cage Frame||Optimized and Strengthened Structure||Q345B Steel|
|Cage Paint||Yellow||Sandblasting and Painted|
|Cage Entry Door||Vertical Sliding||Galvanised Perforated Cold Roll Steel Plate|
|Cage Exit Door||Vertical Sliding/Flap Type||Galvanised Perforated Cold Roll Steel Plate|
|Driver's Cabin||Excluded or Included as per users' requests|| |
|Motor Make||Zhangjiang make|| |
|Gearbox||Kangbo Make Pieli Brand Helical Gearbox|| |
|Mast Section||650*650*1508mm, Φ76mm, δ4.5mm||Q345B Steel, Painted|
|Rack||40*60*1508mm, 8 Modulus.|| |
|Tie-in||Type II, 2900-3400mm; Every 9 m one set;||Q345B Steel, Painted |
|Or as per users request|| |
|Safety Device||SAJ4.0-1.2|| |
|Ground Enclosure|| ||Galvanised Cold Roll Steel Plate|
|Enclosure Door||Double Hinge Side Open Door||Perforated Galvanised Cold Roll Steel Plate|
|Power Supply||Cable & Cable Drum||Galvanised Cold Roll Steel Plate|
|Over Load Protect||Included|| |
|Mast Section||650*650*1508mm, Φ76mm, δ4.5mm||Q345B Steel, Galvanised|
|Power Supply||Slide Contact Line System (Busbar)|
|Floor Selection||Multi-functional Control System (Floor selector, Automatic Landing,
Error Detection and Display, etc.)|