Passenger and Material Hoist 2tons Medium Speed VFD TUV Approved
Features and Advantages
* Modular and standardizing system makes the Kangbo construction
elevators be flexible, efficient.
* The material hoist runs without vibration or trembling, and
starts and stops without surging or jerking.
* The passenger and elevator is reliable with very little breakdown
and is durable with very long work-life.
* Adopt energy-saving helical reducers which are extremely strong,
reliable and durable.
* The integrated elevator car roof, with edges fully welded one
time to complete, enhance hoist cage strength and ensure no water
* The elevators are equipped with full set of safety facilities,
including centrifugal brake, limit switches, Electromechanical
* Frequency control unit (FC), with closed-loop, which gives the
passenger and material hoists very smooth starting and stopping
with low starting current and less wear and tear.
* KANGBO passenger and material hoists apply non-eccentric rollers,
make the installation of hoists be faster and easier, with much
less error. The users don't need to send the skillful technicians
to adjust the rollers position again and again after installation.
* The structure steel of the cages and drive devices are thicken
and enlarge to ensure the strength and worklife.
* The structure of drive device and cage is made of Q345B steel,
the width of KANGBO cage's main steel channel is 160mm, other brand
is 120mm only.
|Item & Article No.||SC200BZ, KP-B07|
|Payload Capacity||2,000 kg|
|Lifting Speed||0–46 m/min.|
|Max. Lifting Height||450 m|
|Cage Width (internal)||1.5 m|
|Cage Length (internal)||3.2 m|
|Cage Height (internal)||2.35 m|
|Motor Control||Frequency Control|
|Engine Power||2x15 kw|
|Gearbox||Helical Gearbox of KANGBO Make|
|Safety Device||Centrifugal Brake SAJ40|
|Power Supply Range||380–500 V, 50 or 60 Hz, 3 phase|
|Mast Section||Square column 650*650*1508 mm with bolted rack|