Passenger and Material Hoist SC200 VFD TUV Approved Single Cage
KANGBO passenger and material hoists apply non-eccentric rollers,
make the installation of hoists be faster and easier, with much
less error. The users don't need to send the skillful technicians
to adjust the rollers position again and again after installation.
The structure steel of the cages and drive devices are thicken and
enlarge to ensure the strength and worklife.
The structure is made of Q345B steel, the width of KANGBO cage's
main steel channel is 160mm, other brand is 120mm only.
The construction lift cage roof is made by a full steel plate, and
the edges are totally welded, to ensure no water leakage and high
Many users of construction hoists worry about water leakage of
hoist cage in rainy season. They have to make the water proof layer
on cage roof regularly to solve the leakage problem.
But KANGBO users don't need to do water proof works by themselves
because the edges of KANGBO hoist cage roof are totally and fully
The users don't need to do water proof by themselves regularly.
The built-in electrical control cabinet inside the car of hoist
make the maintenance personnels comfortable and safe to do their
|Item & Article No.||SC200 KP-B09|
|Payload capacity||2,000 kg|
|Lifting speed||0–60 m/min.|
|Max. lifting height||450 meters|
|Cage width (internal)||1.5 m|
|Cage length (internal)||3.2 m|
|Cage height (internal)||2.35 m|
|Motor control||FC control|
|Engine power||2x23 kw/87Hz|
|Safety device type||centrifugal brake|
|Power supply range||380–500 V, 50 or 60 Hz, 3 phase|
|Type of mast||square column 650*650*1508 mm with bolted rack|
|* Increased lifting height on request. 250 m with step-up
transformer only. 400 m with step-up/step-down transformer.|