Passenger and Material Hoist SC200/200 High Speed VFD with built-in
electrical cabinet Twin Cage KP-B10
* The modular and standardizing system makes the Kangbo
construction hoist be flexible, efficient and ownership cost.
* The passenger and material hoist runs without vibration or
trembling, starts and stops without surging or jerking.
* The passenger and elevator is reliable with very little breakdown
and is durable with very long work-life.
* Adopt helical gearboxes which are high efficient and will let the
users save much electricity costs.
* Applying non-eccentric rollers, make the installation and
maintenance of the hoists be easy, and with much less error. The
users don't need to adjust the rollers position again and again
* The integrated elevator car roof, which made by a steel plate
with edges fully welded one time to complete, enhance hoist cage
strength and ensure no water leakage.
* The construction lifts are equipped with full set of safety
facilities, including centrifugal brake, limit switches,
* Frequency control unit (FC), with closed-loop, which gives the
passenger and material hoists very smooth starting and stopping
with low starting current and less wear and tear.
* The structure steel of the cages and drive devices are thicken
and enlarge to ensure the strength and worklife, the width of
KANGBO cage's main steel channel is 160mm, other brand is 120mm
|Item & Article No.||KP-B10|
|Payload capacity||2,000 KG per Cage|
|Lifting speed||0–60 m/min.|
|Max. lifting height||450 m|
|Cage width (internal)||1.5 m|
|Cage length (internal)||3.2 m|
|Cage height (internal)||2.35 m|
|Motor control||FC control|
|Engine power||2x23 kw/87Hz per Cage|
|Anti-drop Safety Device||centrifugal brake|
|Power supply range||380–500 V, 50 or 60 Hz, 3 phase|
|Mast section||Square column 650*650*1508 mm with bolted rack|