Passenger and material hoist rack and pinion SC200BZ MP-B07
There is a small crane for conenient assembly of the construction
There is the additional 'C' door at cage side for convenient
Available in single or twin hoist cage configuration.
The construction rack and pinion elevators are Variable Frequency
Drive (VFD), with low starting current and much less wear and tear,
very smooth starting and stopping.
Manual or Automatic Controls of the hoist is optional.
There is LED lighting inside construction elevator car.
|Item & Article No.||SC200BZ, MP-B07; SC200/200BZ, MP-B08|
|Payload Capacity||2,000 KG per Cage|
|Lifting Speed||0–46 m/min.|
|Max. Lifting Height||250/400 m*|
|Cage Width (Internal)||1.5 m|
|Cage Length (Internal)||3.2 m|
|Cage Height (Internal)||2.35 m|
|Cage Doors||3 Doors, Entry Door + Exit Door + Side Door|
|Motor Control||FC (Frequency Control)|
|Engine Power||2x15 KW per Cage|
|Safety Device Type||Centrifugal Brake|
|Power Supply Range||380–500 V, 50 or 60 Hz, 3 Phase|
|Mast Section||Square Column 650*650*1508 mm with Bolted Rack|
|* Increased lifting height on request. 250 m with step-up
transformer only. 400 m with step-up/step-down transformer.|